DUGi: Llistar Títols | dc.subject:"Plàstics reforçats amb fibra"

Llistar Títols

S'han trobat 113 ítems

Llistant ítems des de 50 a 75:

1 2 3 4 5

Format	Data	Títol	Autor
Format	Data	Títol	Autor
	31 maig 2023	Health monitoring of CFRP laminates under fatigue and fatigue after impact load via vibro-acoustic modulation measurements	Willmann, Erik
	31 maig 2023	Health monitoring of CFRP laminates under fatigue and fatigue after impact load via vibro-acoustic modulation measurements	Willmann, Erik ; Fiedler, Bodo
	31 maig 2023	Hybridisation of carbon and natural fibers for sustainable composites in automotive applications	Corvo Alguacil, Marina
	31 maig 2023	Identification of damage initiation and progression in open hole composites using acoustic emission and digital image correlation	Chandarana, Neha
	31 maig 2023	Implementation of 3d nonlinear material model in finite element code	Pupure, Liva
	31 maig 2023	Incidence of the mechanisms of damage in the scale effect of composites involving Ultra Thin Plies	París Carballo, Federico
	31 maig 2023	Independent mesh method and RX-FEM modeling of 3d interlock woven composites with open hole	Mollenhauer, David
	31 maig 2023	Influence of voids on thick DCB joint behavior	Fan, Jialiang
	juliol 2024	Interlaminar fracture testing of multidirectional laminates: on finitewidth effect and residual stresses	Garulli, Torquato ; Arteiro, Albertino ; Blanco Villaverde, Norbert ; Renart Canalias, Jordi
	31 maig 2023	Investigating shear performance of PMCS	Flores, Mark
	31 maig 2023	Investigation of failure mechanisms in L-angle composite laminates	Bushpalli, Sindhu
	gener 2016	Investigation and optimization of 3D printers setting and surface treatment	Gávay Pál, Bence
		Investigation and optimization of 3D printers setting and surface treatment	Gávay Pál, Bence
		Investigation and optimization of 3D printers setting and surface treatment	Gávay Pál, Bence
	1 juny 2018	Investigation and optimization of 3D printers setting and surface treatment
	5 juny 2018	Investigation and optimization of 3D printers setting and surface treatment	Gávay Pál, Bence
	31 maig 2023	Investigation of thickness effects in bi-axially braided glass fibre laminates using a parametrised RVE model	Luplow, Tim
	31 maig 2023	Investigation of transverse matrix cracking in fatigue for laminated composites	Patti, Stacy
	31 maig 2023	Longitudinal tensile failure models: experimental validation, benchmarking and future directions	Swolfs, Yentl
	31 maig 2023	Material testing 2.0 for composites	Pierron, Fabrice
	31 maig 2023	Measurement of mixed-mode cohesive laws of a UD composite undergoing delamination with large-scale bridging	Erives, Ruben
	31 maig 2023	Measuring the compressive behaviour of glass/carbon fibre hybrid composite with a 4-point flexural test	Tongloet, Aree
	19 juny 2023	A mechanical interlocking joint between sheet metal and carbon fibre reinforced polymers through punching	Latorre Lázaro, Núria ; Casellas, Daniel ; Costa i Balanzat, Josep
	31 maig 2023	Mechanical joining technology between metal and carbon fiber reinforced polymers through punching	Latorre Lázaro, Núria
	31 maig 2023	Microcracking of CFRP composites during cryogenic thermal cycling	Edwards, Huw

1 2 3 4 5

DUGi

Portal de cerca conjunta als documents digitals de la UdG

Llistar Títols

Matèries

Autors